Your Flooring Project

Your Flooring Project

Choosing your flooring products

Selecting the flooring system that best suits your needs can be a complex task.  Many people will have their favourite products and often recommendations rely heavily on the experience of the person offering them. There are many types of products, brands, and systems to choose from.  To make the decision a little easier, consider the following points:

What are your needs?

How do you intend to use of the floor you need? How long do you want your floor to last? What kind of foot traffic will the floor be exposed to? Do you have any expectations on the maintenance during the life of the floor?  How do you expect the floor to look aesthetically once it has been installed and coated?  These questions should be the beginning of your selection process and need to be explored before you make a purchase.

Be specific about your needs.

No one is a mind reader.  It is very important that you are specific about your needs prior to making a purchase.  Be clear about what you expect from your new timber floor in terms of appearance and performance.  You should then expect a detailed explanation of the pros and cons of the recommended system based on the information you have provided. 

Do not Shop on Price Alone

This statement is very often overused but has never been truer than with flooring and flooring products. Choosing an inferior product will often produce a substandard result on the floor.  Consider also works (e.g., kitchens, painting, etc.) that might have to be re-done if a substandard floor needs to be removed and re-installed.  The lowest price will ensure that you get the cheapest product. You WILL get what you pay for!

Look Closely at any Warranties

Read terms and conditions of warranties offered carefully. There are many warranties that are "self-voiding" in that conditions of the warranty are often unreasonable or difficult to comply with. It is also best to do some research on the company offering the warranty.

Choosing your Coating

Once upon a time timber floors were often coated with 3 coats of a solvent based polyurethane finish.  There has never been a wider choice as there is today, so it is important to spend a little time exploring your options.  You should consider factors such as the aesthetics, anticipated maintenance, staining systems and expected traffic of the floor. 

Asking your contractor which coating they recommend is a good start as they will most likely have extensive experience with certain types and brands as well be up to date with the latest technologies.  You can also contact trusted manufactures as they will very often have a range of different systems available to you.

Coatings can be categorized into a few major groups.

  • Polyurethanes – including single or two component solvent-based, single or two component water-borne, acrylic urethane blends.
  • Penetrating oils & waxes, including air curing, burnishing oils and oil/wax blends.
  • Oil modified Urethanes

 

To download the ATFA’s Coating Choices sheet, click here.