Maintaining Your Timber Floor

Maintaining Your Timber Floor

Timber floors have grown in popularity with now a multitude of opinions.  Maintaining them starts with identifying what kind of coating your floor has been coated with. Most floors are coated with a solvent or water-based polyurethane coating.  Some floors are coated with an oil-based or hard wax oil finish and require a different maintenance regime. Other floors are pre-finished laminates or vinyls. Regardless of what your floor is coated with, your first step should be to follow the coatings manufacturer’s instructions. Below are some helpful brochures on how to maintain your timber floors. 

Here are some handy tips and simple dos and don’ts. Floor Sanding Supplies sell and recommends the Loba Range of Hardwood Maintenance products. We recommend you set up a regular maintenance program that will not only extend the life of the floor, but also enhance its appearance. Domestic floors require a care and maintenance regime. Below are the basic Do's and Don'ts.

For a detailed brochure click here.

 

DO’S

Entrance Matting

Have proper grit capturing mats at all entrances minimising the number of damaging particles. Keep doormats well shaken.

Sweeping

Regular sweeping will remove damaging particles.  We recommend sweeping as regularly as required with a minimum of twice weekly with an anti-static mop or fringe mop.

Protective Pads

Attach felt protector pads to the legs of chairs, tables and other furniture to protect the floor from being scratched and to reduce noise. We stock a range of these pads here.

Furniture

Furniture should be lifted and placed, not dragged, or pushed.

Spills

It is important to wipe up ALL spills immediately, even if the spill is water.  Do not allow spills to sit for extended periods of time.  Non-slip rubber mats should be placed in high use wet areas.

Cleaning

The use of harsh detergents is not recommended or necessary.  Cleaners that are PH neutral should be used for all situations.  Regular washing of sealed floors can enhance appearance and keep it clean.

 

DON’TS

  • Do not wax the floor.
  • Do not wet mop the floor.
  • Avoid spiked heel shoes, pebbles, sand, and other abrasive materials.
  • Do not use steel wool on the floor.
  • Do not use soap or detergents on the floor and never pour water directly onto the floor.
  • Do not use ammonia-based cleaners.

To replenish floor cleaning products, you can visit our Maintenance Products here or call the office directly on 9460 3444.

Recoating Your Timber Floor

One day your floor will need recoating.  The best time to do this is when your floor is tired and not completely worn through.  Your local floor sander will be able to tell you if a maintenance coat is required.  If you need any help or advice, please contact us. You can find them at www.floorsandingsupplies.com.au/loba or call 9460 3444.