Timber Flooring Expectations

Timber Flooring Expectations

There are many variables that will determine what kind of result you will get with a timber floor.  There are however some things that you should expect from a timber floor.

Visible nails should be punched, and holes filled. Generally, timber putty used will be approximately the same as the darker boards in your floor.

Knots, nail holes and gaps at the end of boards are normally filled as well.

Timber floors expand and contract. Some floor movement is normal and should be expected.

Variation in colour between new and old boards is to be expected.

Coatings that are properly maintained will last.

From time-to-time small scratch patterns will be highlighted by strong, bright lighting such as down lights.  If these fine swirl marks are not obvious under natural light, then they should not be a concern.

A floor will not have a completely dust free finish. The surrounding environment will be very likely to have dust particles in the air that will settle in a wet coat.

Removal of very deep cuts is not possible as there is only so much timber that can be sanded from your floor.

Removal of some stains can not be achieved by the sanding and coating process.  Some water stains and animal urine stains are often impossible to completely remove.

A professional contractor will not fill the gaps between the boards. These gaps are not filled as movement of your floor will result in filler cracking.