Fiddes Lightfast Water Stains

$75.43

Shipping calculated at checkout

Best 

Seller

Secure

Checkout

Fast

Delivery

A range of Light Fast Water Stains, formulated to offer exceptional ease of use, combined with an unparalleled, uniform depth of colour for use on all interior timber surfaces.

Fiddes Light Fast Water Stains are ideal for use under Fiddes complete range of finishes, can be hand or spray applied and offers a clean, consistent appearance combined with excellent light fast properties.

PREPARATION

Sand the timber substrate in stages, depending on the species, working up to either a 120-150 screen for floors or to a fine grit for furniture/cabinetry.  The finer the sand, the less grain raise.  Always sand in the direction of the grain pattern where possible, ensuring the removal of any blemishes and glue residue prior to application of Fiddes Wood Dyes. Take care to remove all traces of sanding dust and test the chosen Fiddes Wood Dye on a similar substrate to verify colour / shade.

APPLICATION

Stir the contents well and always check the shade before application.

Wipe on Method - Take a clean, lint free cotton cloth or sponge and apply in the direction of the wood grain where possible. Take care to remove any excess stain immediately with a separate, clean absorbent cloth, again following the direction of the grain pattern. To obtain a uniform color, always wipe evenly, blending the stain over the whole surface area by exerting a degree of pressure when applying by hand. Leave to dry, and do not sand between coats.

Sponge Applicator method ‚Use a 7inch (or wider) Paint Pad Applicator (available from hardware stores) and a wide bucket or paint tray.  Saturate timber following the direction of the grain working our a few boards/areas at a time. Use a paint brush to blend in end boards and leave.

Application videos are available on the Fiddes Australia YouTube Channel.

DRY TIME

  • Hours at room temperature, depending on application method

COVERAGE

15-25 sqm per Litre (depending on substrate and method of application)

COATS

1 coat ‚ further coats will deepen colour/shade.

THINNERS

Water

RECOMMENDED FOR USE ON

Fine Furniture, Doors, Floors, Cabinet Work and Panelling.