Fiddes Outdoor Furniture Oil
$124.68
Shipping calculated at checkout
Best
Seller
Secure
Checkout
Fast
Delivery
A blend of natural Oils and resins offering a transparent satin finish with exceptional durability and resistance for all external timber furniture and joinery. Produces a clear, quick -drying, water-repellent and weather-resistant finish that will not peel or flake when applied. Contains UV filters and is VOC compliant.
Check out Stop Loss Bags for the perfect solution to keeping your leftover product fresh.
Sizes: 1lt & 2.5lt
Preparation:
Ensure that all surfaces are thoroughly cleaned, dry, and devoid of any prior finishes. Prior to application, eliminate any fungal growth, dirt, or moss from the old timber. Sand the substrate using medium 120 grit sanding paper or a 120 grit sanding disk to remove all dust residues.
Application
Conduct the application in dry conditions and always perform a test on a small area before proceeding with the full application. No primer is necessary. A minimum of three coats is recommended. The formulation is designed for direct application and does not require thinning. Stir the contents thoroughly before and during use. Utilize a high-quality bristle or synthetic brush to apply the product evenly and thoroughly, following the direction of the grain. Allow the surface to dry for 4-6 hours or overnight in a well-ventilated area. If necessary, lightly sand with fine 320 grit sandpaper. Clean applicators using White Spirits.
Re-Application: To refresh a previous application, lightly sand the area with 150 grit sandpaper and reapply. It is advisable to refresh the application annually. Coverage: The product covers approximately 20 square meters per litre, depending on the substrate.